How to charge the Godox AD200 Pro

The Godox AD200 Pro is a powerful portable flash unit that uses a removable lithium-ion battery for power. To charge the battery, follow these steps:

The Godox AD200 Pro is a powerful portable flash unit that uses a removable lithium-ion battery for power. To charge the battery, follow these steps:
1.    Turn Off the Flash: Before attempting to charge the battery, ensure that the Godox AD200 Pro is turned off.

2.    Open Battery Compartment: Locate the battery compartment on the rear side of the AD200 Pro. Open the compartment door by sliding or pressing the latch, depending on the model.

3.    Remove the Battery: Take out the lithium-ion battery from the compartment. The battery is designed to be removable for easy charging and replacement.

4.    Prepare the Charger: The Godox AD200 Pro typically comes with a dedicated battery charger. Plug the charger into a standard electrical outlet. Make sure the voltage matches your local power supply.

5.    Insert the Battery into the Charger: Insert the removed battery into the charger's battery slot. Ensure the battery's contacts match the charger's contacts.

6.    Charging Indicator: Most Godox battery chargers have LED indicators to show the charging status. The LED might turn red to indicate that the battery is charging.

7.    Charging Time: The charging time will vary depending on the battery's current level and the charger's specifications. Refer to the user manual for estimated charging times.

8.    Charging Complete: Once the battery is fully charged, the LED indicator on the charger might turn green or change its color. This indicates that the battery is ready for use.

9.    Remove the Battery: Disconnect the charger from the power outlet and then remove the fully charged battery from the charger.

10. Insert Battery into Flash: Insert the fully charged battery back into the battery compartment of the Godox AD200 Pro. Make sure it's securely seated and properly aligned.

11. Close Battery Compartment: Close the battery compartment door securely.

12. Turn On the Flash: Now that the fully charged battery is inserted, turn on the Godox AD200 Pro. It should be ready for use.

It's essential to use the provided or recommended charger (currently the Godox C29) specifically designed for the Godox AD200 Pro's battery. Using a different charger can potentially damage the battery or the flash unit. Always refer to the user manual and follow the manufacturer's instructions for safe and proper battery charging.

James Firth

Content Creator